Lexmark 279 manual Sending a fax using the computer, Sending a fax using a shortcut number

Faxing 83

3From the printer control panel, navigate to:

> Fax > > enter a fax or shortcut number on the keypad > > Original Size >

Note: If you want to fax another document, then place it on the scanner glass, press the left or right arrow

button to scroll to Scan the Next Page, and then press .

4Press the left or right arrow button to scroll to Finish the Job, and then press .

Sending a fax using the computer

1With a document open, click File > Print.

2Select the printer, and then click Properties, Preferences, Options, or Setup.

3Navigate to: Fax > Enable fax

4Enter the recipient fax number or numbers.

5If necessary, enter a prefix in the “Dialing prefix” field.

6Select the appropriate paper size and page orientation, and then apply the changes.

Notes:

•The fax option is available for use only with the PostScript driver or the Universal Fax Driver. For information on installing these drivers, go to http://support.lexmark.com.

•The fax option must be configured and enabled in the PostScript driver under the Configuration tab before it can be used.

Sending a fax using a shortcut number

Fax shortcuts are just like the speed dial numbers on a telephone or fax machine. A shortcut number (1–999) can contain a single recipient or multiple recipients.

1Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

Notes:

•Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.

•The ADF indicator light comes on when the paper is loaded properly.

2If you are loading a document into the ADF tray, then adjust the paper guides.

3Press # , and then enter the shortcut number on the keypad.

4Press .

Sending a fax at a scheduled time

1Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.