Lexmark 279 manual Setting up the printer software, Installing the printer, For Windows users

Additional printer setup			23
		Use the	To
	5	LINE port	Connect the printer to an active telephone line through a standard wall jack (RJ‑11), DSL filter,
			or VoIP adapter, or any other adapter that allows you to access the telephone line to send
			and receive faxes.
	6	USB printer port	Connect the printer to a computer.
7		Security slot	Attach a lock that will secure the printer in place.

Setting up the printer software

Installing the printer

1Obtain a copy of the software installer package.

2Run the installer, and then follow the instructions on the computer screen.

3For Macintosh users, add the printer.

Note: Obtain the printer IP address from the TCP/IP section in the Network/Ports menu.

Adding available options in the print driver

For Windows users

1Open the printers folder.

In Windows 8

From the Search charm, type run, and then navigate to: Run > type control printers > OK

In Windows 7 or earlier

aClick , or click Start and then click Run.

bType control printers.

cPress Enter, or click OK.

2Select the printer you want to update, and then do either of the following:

•For Windows 7 or later, select Printer properties.

•For earlier versions, select Properties.

3Navigate to the Configuration tab, and then select Update Now ‑ Ask Printer.

4Apply the changes.

For Macintosh users

1From System Preferences in the Apple menu, navigate to your printer, and then select Options & Supplies.

2Navigate to the list of hardware options, and then add any installed options.

3Apply the changes.