Preparing to Install Zoom Clamp & Gear Sleeve
Determine the type of lens being used on the camera.
Type 1 Lenses have a lens opening that is NOT larger in diameter than the zoom ring. (Fig. 1).
| lens |
|
| opening |
|
| zoom |
|
| ring |
|
| bayonet |
|
Type 1 lens | mount | Type 2 lens |
| ||
(Figure 1) |
| (Figure 2) |
Type 2 Lenses have a lens
opening that IS larger in diameter than the zoom ring. (Fig. 2).
Zoom Clamps & Gear Sleeves Included with Housing
There are 2 different Zoom Clamps and Gear Sleeves provided with the housing. Start with the suggested Zoom Clamp and Gear Sleeve depending on the Type of lens being used. See (Fig. A or B)
Normally used with | Normally used with |
Type 1 lens (Fig.1) | Type 2 lens (Fig.2) |
| #5509.28 Package |
#9059.8 small diameter clamp: | #9059.9 large diameter clamp: |
For use with #0073 sleeve | For use with #0073.1 sleeve |
wide |
| narrow |
|
grooved | + | grooved | + |
extension | extension | ||
tabs |
| tabs |
|
| thick ribs |
| thin ribs |
#0073 sleeve: Use with | #0073.1 sleeve: Use with |
small diameter zoom clamp | large diameter zoom clamp |
#9059.8 | #9059.9 |
Figure A | Figure B |
14
