Product Registration | Ikelite 6871.07 specification

Product Registration

Please go to www.ikelite.com to register your Ikelite housing within 15 days of purchase.

Ikelite Underwater Systems

50 West 33rd Street

Indianapolis, IN 46208 USA

www.ikelite.com

6871.07_Canon_7D_05-1212

Image 32

Ikelite 6871.07 instruction manual Product Registration

Contents

SLR-DC Housing Canon EOS 7D Table of Contents Specifications Package Contents Preparation Parts of the Housing Front View Side View Back View Initial Camera Setup Opening the Housing Housing Conversion Circuitry Setting the Conversion Circuitry Strobe ID Switch Using the Conversion Circuitry Set DS Substrobe to TTL mode Mode and Compensation Buttons DS50 and DS125 Substrobe Compatibility Attaching the Flash Connection for External Strobes Attaching Camera to Housing Tray Installing Camera in Housing Closing the Housing Final Check Attaching a Sync Cord to the Housing Turn Camera On Preparing to Install Zoom Clamp & Gear Sleeve Zoom Clamps & Gear Sleeves Included with Housing Installing the Zoom Clamp & Gear Sleeve On the Type 1 Lenses Type 1 Lenses Figure D Installing the Zoom Clamp & Gear Sleeve On Type 2 Lenses Installing Zoom Clamp/Sleeve on Type 2 Lenses Manual Focusing Installing the Port Lens Ports Installing the Port To Remove PortPort Seal Inside View Attaching an Ikelite Strobe Arm to the Housing Handle Lubricants UsagePre-Dive Your System Troubleshooting Problem Solution Any trapped moisture forming fog on the lens port EV-Controller Use Recommended AccessoriesAccessory Mounting Points Maintenance Control Maintenance Diagram B Housing Maintenance Photo Tips Storing the HousingSpare Parts Technical Support Photo Tips Returning Products for Service outside the United States Limited WarrantyReturning Products For Service Product Registration