Installing it properly 1.
2.
3.
4.
Allow 1.25 cm (% inch) space on each
side and at the top of the refrigerator
for ease of installation.
If the hinge side of the refrigerator is
to be against a wall, you might want to
leave extra space so the door can be
opened wider.
The refrigerator can be flush against
the back wall.
Make sure the ice maker water supply
has been connected. Refer to Installa-
tion Instructions.
Leveling it Your refrigerator has two front leveling
screws - one on the right and one on the
left. To adjust one or both of these,
follow the directions below.
1.
Remove base grille. (See page 17.)
2. To raise front, turn screw clockwise.
3. To lower front, turn screw counter-
to lower
Use a screw-
driver to adjust
clockwise.
4. Check with level.
5. Replace base grille. (See page 17.)
screw