INSTALLATION OPTIONS
Installation Options
Installation options 1, 2, 3, and 4 are the most commonly used applications involving specific shorepower connections, generator power options, and AC load configurations.
Shorepower configurations: Systems with one 30 amp single phase shorepower source with optional generator
Systems with two 30 amp shorepower sources with optional generator
Systems with a 50 amp 120 volt single phase (3 wire) shorepower source with optional generator
Systems with a 50 amp 120/240 volt split phase (4 wire) shorepower source with optional generator
Inverter/charger configurations:
Single Input/Single Output Freedom Marine Model 10, 15, 20
Dual Input/Dual Output Freedom Marine Model 25 and 30
•Can be connected with single in/single out mode
•Can be connected with dual in/single out mode
•Can be connected with dual in/dual out mode
General Guide for Fuse Size and DC Cable Size*
|
| Nominal | Cable AWG by Length | ||
|
| Current | (metric) |
|
|
|
|
|
|
|
|
Model | Fuse Size | DC Amps | |||
|
|
|
|
|
|
200 ADC | 100 A | 2 | 2 | 1/0 | |
|
|
|
|
|
|
200 ADC | 150 A | 1/0 | 1/0 | 2/0 | |
|
|
|
|
|
|
300 ADC | 200 A | 2/0 | 2/0 | 3/0 | |
|
|
|
|
|
|
300 ADC | 250 A | 2/0 | 3/0 | 3/0 | |
|
|
|
|
|
|
350 ADC | 300 A | 3/0 | 3/0 | 4/0 | |
|
|
|
|
|
|
*This guide is intended to provide general recommendations for fuse and cable sizing. Always consult Local and National Electrical Codes for proper fuse and cable size prior to installation.
Note: The chassis grounding wire must be no smaller than 1 gauge under that of the positive battery cable.
29
