Platform event filtering configuration | HP 436853-001 specs

2.On ProLiant ML150 G2 servers:

a.To navigate to the Monitor menu, press the right arrow (→) key.

b.Scroll down to view the different sensors. Data is real-time and updated periodically.

3.On ProLiant DL140 G2 and ProLiant DL145 G2 servers:

a.Press the right arrow (→) key to navigate to the Advanced menu.

b.Press the down arrow (↓) key to scroll to IPMI. Press the Enter key.

c.Press the down arrow (↓) key to scroll to Realtime Sensor Data. Press the Enter key.

The Loading data. Please wait… message appears. After this message disappears, the Temperature and Voltage sensor data appears. Data is displayed in real-time and updated periodically.

4.On the ProLiant ML110 G3 server:

a.Press the right arrow (→) key to navigate to the Advanced menu.

b.Press the down arrow (↓) key to scroll to Hardware Health Configuration menu. Press the Enter key. The real-time sensor data displays.

Platform event filtering configuration

The PEF Configuration screen enables you to configure LO100 to take selected actions on received or internally generated event messages. These actions include powering down the system, system reset, and triggering the generation of an alert.

To configure a PEF for a particular sensor, click the PEF button to the far right of that sensor on the Monitoring Sensors screen. The PEF button adjacent to each sensor opens a PEF Configuration page for that sensor.

The PEF Configuration screen contains two sections: Current PEF Entries and Add PEF Entry. The Current PEF Entries section includes Sensor Type, Sensor Name, PEF Action, and PEF Control information. The Add PEF Entry section enables you set an action.

Initially, there are no entries in the Current PEF Entries section because no PEFs are defined. When PEF entries are defined, the PEF Control field is active and allows individual entries to be enabled, disabled, or deleted.

Using LO100 33

Image 33

HP 436853-001 manual Platform event filtering configuration

Contents

HP ProLiant Lights-Out 100 Remote Management User Guide Audience assumptions Contents Acronyms and abbreviations Index Operational overview Server management featuresUser guide overview Server management Operational overview Installation Remote management card kit contentsPre-installation procedures Installation Post-installation procedures Installation Configuration Configuring network accessEstablishing user accounts Enabling serial access to the LO100 Using the serial port LO100 serial port configuration Using TCP/IP over Ethernet management port Selecting an Ethernet management port Obtaining a Dhcp IP address from the Bios Setup Utility Enabling telnet and Http services Setting up a static IP address from the Bios Setup Utility Updating the firmware Updating the firmware remotelyRompaq /D infile outfile Tftp settings Configuration SSL overview Using LO100 Ssh -l loginname ipaddress/dns name Putty.exe -ssh -telnet -rlogin -raw user@hostSSH overview Installing a certificate or private key through the CLP Importing a certificateCreating a certificate Help o load o reset o set Using CLPCLP overview Load -source URI -oemhpfiletype key Show Start Stop Exit Version Base commandsHelp/-h All/-a Help show Usage show targetoptionsproperties Show -h Show -help Usage show targetoptionsproperties Using LO100 Rompaq /D infile outfile Specific commands Ipmi 2.0 supportMap1/- version Version Logging in through a web browser Logging in to LO100 Logging in through the CLP Browser main menu options Hardware Inventory Controlling server power remotely Controlling server power through the CLP Controlling server power from a browserSystem1/ reset System1 reset System1/ start /system1 System1 started Viewing sensors data from the Bios Setup Utility Controlling server power through the Bios Setup UtilityMonitoring sensors Viewing sensors data from a web browser Platform event filtering configuration Accessing the system event log from a web browser Using the system event log Accessing the system event log from the CLP Accessing the system event log from the Bios Setup UtilityEnter cd /./system1/log1 Network settings Configuring network settings using a web browserConfiguring network settings using the CLP Configuring network settings using the Bios Setup Utility Using the virtual floppy feature Configuring virtual floppy from a Web browser Configuring the Tftp Server Configuring the virtual floppy from the Bios setup Configuring virtual floppy from the CLPSet oemhpvsitftpserver=10.12.52.142 Rebooting the server Platform event trap configurationSet oemhpvsipath=rboot Set oemhpvsipermission=rw Changing user settings through a web browser User administration Accessing the remote console through telnet Changing user settings through the CLPBios console text redirection through telnet Linux console redirection S012345respawn/sbin/agetty -L 115200 ttyS0 vt102 Microsoft Windows EMS management HP SIM support Acronyms and abbreviations KCS SSL Index ROMPaq utility Safety considerations Index