•The start command causes a target to change state to a higher run level.

•The stop command causes a target to change state to a lower run level.

•The version command queries the version of the CLP implementation or other CLP elements. For example:

/./map1/-> version Version 1.00

/./map1/-> cd firmware /./map1/firmware/-> version Version 1.00

/./map1/firmware/-> show

/./map1/firmware

Targets

Properties

fwversion=0.59

Verbs

cd

version

exit

show

reset

load

help /./map1/firmware/-> show fwversion fwversion=0.59

/./map1/firmware/-> fwversion Invalid command

/./map1/firmware/->

Specific commands

CLP syntax for specific commands is found in the sections that also describe the functionality through the Web interface.

IPMI 2.0 support

LO100 supports the industry-standard IPMI 2.0. The IPMI specification defines standardized, abstracted interfaces that can be used for monitoring and control functions that are built in to the platform hardware.

In addition to supporting the mandatory commands for IPMI 2.0, the following additional IPMI 2.0 features are supported by LO100:

•Additional IPMI 2.0 commands o Get Channel Cipher Suites

o Set/Get Channel Security Keys

o Suspend/Resume Payload Encryption

Using LO100 27