Monitoring sensors | HP 436853-001 specification

Controlling server power through the BIOS Setup Utility

To control how the system responds after a power failure through the BIOS Setup Utility:

1.Press the F10 key during POST to enter the BIOS Setup Utility.

2.Press the right arrow (→) key to navigate to the Power Tab of the BIOS Setup Utility.

3.Press the down arrow (↓) key to scroll down to After Power Failure. Press the Enter key.

4.On the ProLiant ML150 G2, or ML110 G3 servers: Use the arrow keys to navigate between Stay Off, Last State, and Power On. Select your power control option, and press the Enter key.

5.On ProLiant DL140 G2 or ProLiant DL145 G2 servers: Use the arrow keys to navigate between Always Off, Previous State, and Always On. Select your power control option, and press the Enter key.

6.Press the F10 key to save and exit.

Monitoring sensors

LO100 provides operating system-independent remote monitoring of the current status of major sensors of a target server including system temperature, fans, and voltage. You can view the data for this feature on the Monitoring Sensors Page through a web browser or through the BIOS Setup Utility.

Viewing sensors data from a web browser

The Monitoring Sensors screen displays a snapshot of the temperature, fans, and voltage sensor data including sensor type, name, status, and current reading. To access this page from a web browser, click Monitoring Sensors on the main menu navigation bar.

To update the display, click the Refresh button on the web browser. To view or add a PEF action, click PEF. See "Platform Event Filtering configuration (on page 33)" for more information.

Viewing sensors data from the BIOS Setup Utility

1.Press the F10 key during POST to enter the BIOS Setup Utility.

Using LO100 32

Image 32

HP 436853-001 manual Monitoring sensors, Controlling server power through the Bios Setup Utility

Contents

HP ProLiant Lights-Out 100 Remote Management User Guide Audience assumptions Contents Acronyms and abbreviations Index Server management features Operational overviewUser guide overview Server management Operational overview Pre-installation procedures InstallationRemote management card kit contents Installation Post-installation procedures Installation Establishing user accounts ConfigurationConfiguring network access Using the serial port Enabling serial access to the LO100 Using TCP/IP over Ethernet management port LO100 serial port configuration Obtaining a Dhcp IP address from the Bios Setup Utility Selecting an Ethernet management port Setting up a static IP address from the Bios Setup Utility Enabling telnet and Http services Rompaq /D infile outfile Updating the firmwareUpdating the firmware remotely Tftp settings Configuration Using LO100 SSL overview SSH overview Ssh -l loginname ipaddress/dns namePutty.exe -ssh -telnet -rlogin -raw user@host Creating a certificate Installing a certificate or private key through the CLPImporting a certificate Using CLP Help o load o reset o setCLP overview Load -source URI -oemhpfiletype key Base commands Show Start Stop Exit VersionHelp/-h All/-a Help show Usage show targetoptionsproperties Show -h Show -help Usage show targetoptionsproperties Using LO100 Rompaq /D infile outfile Map1/- version Version Specific commandsIpmi 2.0 support Logging in to LO100 Logging in through a web browser Browser main menu options Logging in through the CLP Controlling server power remotely Hardware Inventory Controlling server power from a browser Controlling server power through the CLPSystem1/ reset System1 reset System1/ start /system1 System1 started Controlling server power through the Bios Setup Utility Viewing sensors data from the Bios Setup UtilityMonitoring sensors Viewing sensors data from a web browser Platform event filtering configuration Using the system event log Accessing the system event log from a web browser Enter cd /./system1/log1 Accessing the system event log from the CLPAccessing the system event log from the Bios Setup Utility Configuring network settings using the CLP Network settingsConfiguring network settings using a web browser Configuring network settings using the Bios Setup Utility Using the virtual floppy feature Configuring the Tftp Server Configuring virtual floppy from a Web browser Set oemhpvsitftpserver=10.12.52.142 Configuring the virtual floppy from the Bios setupConfiguring virtual floppy from the CLP Platform event trap configuration Rebooting the serverSet oemhpvsipath=rboot Set oemhpvsipermission=rw User administration Changing user settings through a web browser Bios console text redirection through telnet Accessing the remote console through telnetChanging user settings through the CLP Linux console redirection Microsoft Windows EMS management S012345respawn/sbin/agetty -L 115200 ttyS0 vt102 HP SIM support Acronyms and abbreviations KCS SSL Index ROMPaq utility Safety considerations Index