Agilent Technologies 8156A :DISPlay:ENABle , :DISPlay:ENABle?

105
Remote Commands
DISPlay Commands
Description The query returns the brightness of the display,
where 0 means least brightness, and 1 means
full brightness.
Example OUTPUT 728;":DISP:BRIG 0.5"
OUTPUT 728;":DISP:BRIG?"
ENTER 728;A$
:DISPlay:ENABle
Syntax :DISPlay:ENABle <wsp> OFF|ON|0|1
Description This command enables or disables the fr ont
panel display.
Set the state to OFF or 0 to switch the display
off, set the state to ON or 1 to switch the
display on. The default is for the di splay to be
on.
:DISPlay:ENABle?
Syntax :DISPlay:ENABle?
Description The query returns the current st ate of the
display.
A returned value of 0 indicates that the display
is off. A returned value of 1 indicates that the
disp lay is on.
Example OUTPUT 728;":DISP:ENAB ON"
OUTPUT 728;":DISP:ENAB?"
ENTER 728;A$