122
Remote Commands
SYSTem Comma nds
OUTPUT 728;":STAT:QUES:PTR?"
ENTER 728;A$

:STATus:PRESet

Syntax :STATus:PRESet
Description This command presets all the enable registers
and transition filters for both the OPERatio n
and QUEStionable nodes.
•All the bits in the ENABle registers are set to
0
•All the bits in the PTRansition registers are
set to 1
•All the bits in the NTRansition registers are
set to 0
Example OUTPUT 728;":STAT:PRES"

8.8 SYSTem Commands

:SYSTem:ERRor?

Syntax :SYSTem:ERRor?
Description This qu ery returns the n ext error f rom the error
queue (see “The Error Queue” on page 84).
Each error con sists of the error code and a short
description of the er ror, sep arated by a comma,
for example 0,"No error". Erro r codes are
numbers in the range -32768 and +32767.
Negative error numbers are defined by the
SCPI standard. Positiv e erro r number s ar e
device dependent. The errors are listed in
“Display Messages” on page 2 75