118
Remote Commands
STATus Co mmands
•Bit 1, which is 1 when the motor that
positions the attenuator f ilter is settling.
•Bit 3, which is 1 while the ins tr ument is
performing an attenuation sweep.
•Bit 7, which is 1 after the instr ument has
repositioned the attenua tor filter due to a
change in temperature.
Example OUTPUT 728;":STAT:OPER?"
ENTER 728;A$

:STATus:OPERation:NTRansition

Syntax :STATus:OPERation:NTRansition
<wsp> <value>
Description This command sets the bits in the NTRansition
register. Setting a bit in this register enables a
negative transition (1→0) in the correspond ing
bit in the CONDitio n register to set the bit in
the EVENt register.

:STATus:OPERation:NTRansition?

Syntax :STATus:OPERation:NTRansition?
Description This query returns the current contents of the
OPERation:NTRansiti on regis ter.
Example OUTPUT 728;":STAT:OPER:NTR 138"
OUTPUT 728;":STAT:OPER:NTR?"
ENTER 728;A$

:STATus:OPERation:PTRansition

Syntax :STATus:OPERation:PTRansition
<wsp> <value>