74
Setting Up the System
Setting the Display Resolution

5.8 Setting the Display Resolution

This parameter sets the reso lut ion o f the atten uati on fact or and the
calibration factor on the screen.
1. Press SYST repeatedly until RESOLUT is shown at the bottom of
the display.
2. Use M odify keys to se lect the setting.
1/100 sets a resolutio n of 0. 01.
1/1000 sets a resolutio n of 0. 00 1.

Resetting the Display Resolution

To reset RESOLUT, press and hold SYST until the value re sets (this
takes approximately two seconds).
RESOLUT resets to 1/100.