Agilent Technologies 8156A manual AC Line Power Supply Requirements, Line Power Cable

Installation

AC Line Power Supply Requirements

A.3 AC Line Power Supply Requirements

The Agilent Technologies 8156A can operate from any single- phase AC power source that supplies between 100V and 240V at a frequency in the range from 50 to 60Hz. The maximum power consumption is 40VA with all options installed.

Line Power Cable

In accordance with international safety standards, this instrument has a three-wire power cable. When connected to an appropriate AC power receptacle, this cable earths the instrument cabinet. The type of power cable shipped with each instrument depends on the country of destination. Refer to Figure A-1 for the part numbers of the power cables available.

Figure A-1 Line Power Cables - Plug Identification

WA RN IN G	To avoid the possibility of injury or death, you must observe the
	following precautions before switching on the instrument.
	• If this instrument is to be energized via an autotransformer for
	voltage reduction, ensure that the Common terminal connects to the
	earth pole of the power source.
	• Insert the power cable plug only into a socket outlet provided with a
	protective earth contact. Do not negate this protective action by the
	using an extension cord without a protective conductor.

144