Delfield specifications Built-in remote milk or beverage dispensers, Model MF-31

Short form specifications

The exterior sides, bottom and top edge shall be 20-gauge galvanized steel. 14-gauge exterior bottom applies to self contained models only.

Inner liner shall be water tight and constructed of 22-gauge stainless steel with a 1.00” (2.54cm) I.P.S. drain. Opening(s) shall have throat liners constructed of high impact plastic. Unit to be insulated with foamed-in-place polyurethane insu- lation with a non-conductive breaker strip.

Each opening shall have an insulated, stainless steel folding lid with aluminum liner, molded rubber edge and black plastic handles.

Each self-leveling mechanism shall be field adjustable by add- ing or removing stainless steel extension springs in the eleva- tor housing inside the unit. The elevators shall be connected by removable platform carriers constructed of 18-gauge stainless steel.

Refrigeration system (to provided by others) shall use HFC- 134a refrigerant. An expansion valve and copper tubing con- nection to the remote refrigeration system shall be provided. NOTE: Temperature and pressure controls are not provided on remote models.

THE FOLLOWING APPLIES TO MODELS MF-2821, MF-31, MF-44 AND MF-57 ONLY:

(6)anodized aluminum divider trays will be supplied per opening. NOTE: See chart on back for milk storage capacity.

Optional Accessories & Modifications

•Lid locking device

•Wire baskets (not available on MF-2020)

•Lexan® covers

•Special refrigerants (contact factory)

PROJECT

ITEM #

QUANTITYDATE

APPROVAL

MF

Built-in remote milk or beverage dispensers

Model MF-31

The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com

Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.