Cisco Systems 2.1(1) manual How to Use the DumpCfg Utility, Using DBDiff, 164

Chapter 13: - Using Cisco Common Tools

How to Use the DumpCfg Utility

Step 3 In the Arguments field, enter desired arguments, as described in the Using section below.

Note: When entering arguments, the dbdiff command is already implied. Do not enter it in the Arguments field.

Step 4 Specify the command duration time or accept the default (60 seconds). This is the amount of time the command will attempt to run before terminating.

Step 5 If desired, check Elevate Command Priority. This ensures the command will run regardless of the level of server activity.

Step 6 Click the Run button.

To Access DBDiff from a Command Line on a Node

From a command-line on an ICM node on which SQL Server is installed, you can access DBDiff from any location on the drive on which ICM is installed. For example:

c:\>dbdiff

c:\temp>dbdiff

Using DBDiff

Syntax: dbdiff <database1.table@host1> <database2.table@host2>

You can also use the batch script diffconfig.bat to invoke DBDiff for various tables to automatically compare two ICM databases.

Syntax: diffconfig <database1> <host1> <database2> <host2>

<database2.table@host2>

For example: diffconfig cust1_sideA geoxyzlgra cust1_sideB geoxyzlgrb

Command Line Options

Syntax: DBDiff {database a}.{table a}[@server a] {database b}.{table b}[@server b] [/out:{file}] [/key:{pkey1,pkey2,...}] [/where:"{where clause}"]

How to Use the DumpCfg Utility

Use the DumpCfg utility to analyze records in the ICM Config_Message_Log table to determine what actions have been performed on an ICM system, when, by whom, and using what applications.

For use with ICM Loggers only, but can be run from any ICM component.

Cisco Support Tools User Guide for Cisco Unified Software Release 2.1(1)

164