Cisco Systems 2.1(1) manual Viewing and Killing a Service Examples, Server, 133

Chapter 12: Using Cisco Tools from a Command Line

	How to Use the Processes Utility from a Command Line
Command:	Description:	Example:
kill	Terminates a started process on the target system.	>stop <pid> <process_name>
save	Saves the latest list command results to a processes file in the	>save
	application server's Repository.	OR
	Saved output is stored as XML-formatted text.
		>save <filename>

If no file name is specified, output is saved to a file named:

Processes list <host_name> <timestamp>.xml.

	Optionally, you can include an argument that specifies a file name.
files	Displays the list of precesses files in the application server's	>files
	Repository.
view	Displays the contents of a precesses file from the Repository on	>view <filename>
	the application server.	OR
		>view <filename>
		<localfile_path\filename>
remove, rm	Deletes a specified precesses file from the Repository on the	>remove <filename>
	application server.
rename, ren	Renames a precesses file in the Repository on the application	>rename <filename>
	server.	<new_filename>
read_file, read	Directs command input to another input file.	>read <filename>
	For example, you can direct input to run a batch file that contains
	a series of commands executable by this utility.
silent	Executes command without displaying output.	><command> /silent
	Note: Available in command-line mode only.
quit, q	Ends the program.	>quit

Viewing and Killing a Service - Examples

The following table shows an example of viewing and killing a process, with a description of each entry.

Command Option:	Description:
>processcontrol	Invokes the Processes utility.

Cisco Support Tools User Guide for Cisco Unified Software Release 2.1(1)

133