Parameter Descriptions
•cicr_meters, cmeters: Displays the CICR meters for both CIC sides.
•echo: Controls echoing of command lines
•error_stop: Controls setting of stop on error flag.
•glbl_meters, gmeters: Displays the global meters for both CIC sides.
•help, ?: Display program description.
•link_ctrl, lctrl: Used in upgrade to shut down all links 1-on a CIC A/B or 2-to all CICRs side
A/B.
•link_stat, lstat: Displays the link status for both CIC sides.
•quit, q: Ends the program.
•read_file, read: Directs command input to another input file
•table_values, tbl_vals: Displays the CIC Table values including timeouts & thresholds.
How to Use the CTITest Utility
Use the CTITest utility to debug in a Cisco ICM CTI environment. CTITest can be used as an
interactive CTI client for demonstration or debugging purposes.
It connects to the CTI Server through a socket connection, and displays either all of the events
that are occurring on the switch (a CTI bridge client application), or only the events which
pertain to a single agent. If a CTITest has the same configuration that your application does,
the expected events and switch behavior is seen in the CTITest program.
For use with CTIOS PGs only.
Note: This tool can be used in both Interactive Mode and Batch Mode. For details on scheduling
this tool to run in batch mode see Using Batch Mode.

To Access CTITest from the Dashboard

To run CTITest from the Support Tools Dashboard:
Step 1 Use the System Select screen to select the system (namely, PG) you want to work with.
Step 2 From the Dashboard menu, select Cisco Common Tools > CTITest.
Step 3 In the Arguments field, enter desired arguments, as described in the Using section below.
Cisco Support Tools User Guide for Cisco Unified Software Release 2.1(1)
159
Chapter 13: Using Cisco Common Tools
How to Use the CTITest Utility