Chapter 13: Using Cisco Common Tools

How to Use the OPCTest Utility

checksum, check: Requests router to do a checksum.

debug_control, debug: Controls various kinds of debugging output from opc.

dump: Requests opc to do a internal state dump to a file.

dump_agent, da: Dump contents of Agent within OPC.

dump_call, dc: Dump OPCs call states.

dump_hash, dh: Display OPCs internal hash statistics.

dump_struct, ds: Requests OPC to dump a structure.

dump_tpservices, dtps: Dump Third Party Service Data object.

echo: Controls echoing of command lines

error_stop: Controls setting of stop on error flag.

exit_opc, exitopc: Sends an message telling the OPC to exit.

expression, expr: Gives the router an expression to evaluate.

help, ?: Displays this help.

list_agents, la: Display OPCs AgentStates for specified Group.

list_calls, lc: Display OPCs call states.

list_routing_client, lrc: Display OPCs Routing Client stats for peripheral.

mem_leaks: Dump memory leakage based on checkpoints from prior calls.

network_trunk_group_trace, ntg_trace: Controls NetworkTrunkGroup tracing in the OPC.

peripheral_trace: Controls Peripheral tracing in the OPC.

quit, q: Ends the program.

read_file, read: Directs command input to another input file

route_call: Sends a route call request to the router.

route_trace: Controls Route tracing in the OPC.

service_trace: Controls Service tracing in the OPC.

skill_group_trace: Controls SkillGroup tracing in the OPC.

status: Sends an message telling OPC to display its status.

stop_log: Requests logmsg to stop logging messages.

Cisco Support Tools User Guide for Cisco Unified Software Release 2.1(1)

175

Page 189
Image 189
Cisco Systems 2.1(1) manual 175