Step 4 Specify the command duration time or accept the default (60 seconds). This is the amount of
time the command will attempt to run before terminating.
Step 5 If desired, check Elevate Command Priority. This ensures the command will run regardless of
the level of server activity.
Step 6 Click the Run button.

To Access NMStart from a Command Line on a Node

From a command-line on an ICM Call Router, Logger, AW, or PG, you can access NMStart
from any location on the local physical drive. For example:
c:\>nmstart
d:\temp>nmstart

Using NMStart

Syntax: nmstart <customer_instance> <node>
For example: c:\> nmstart cisco pg3a
How to Use the NMStop Utility
Use the NMStop utility to stop an ICM service on an ICM Call Router, Logger, AW, or PG.
Note:
This tool can be used in both Interactive Mode and Batch Mode. For details on scheduling
this tool to run in batch mode see Using Batch Mode.
The Support Tools Unknown Process and Services Explorer is an alternate, more robust utility
with which to stop ICM services.

To Access NMStop from the Dashboard

To run NMStop from the Support Tools Dashboard:
Step 1 Use the System Select screen to select the system you want to work with.
Step 2 From the Dashboard menu, select Cisco Common Tools > NMStop.
Step 3 In the Arguments eld, enter desired arguments, as described in the Using section below.
Cisco Support Tools User Guide for Cisco Unified Software Release 2.1(1)
172
Chapter 13: - Using Cisco Common Tools
How to Use the NMStop Utility