Cisco Systems 2.1(1) manual Shutdown Tool, StopShut, To Access Stopshut from the Dashboard, 227

Chapter 14: Using 3rd Party Common Tools

Shutdown Tool

Note: Because the Dashboard automatically sets the allowable commands for this tool, the Dashboard screen for this utility does not contain a command line input field.

Shutdown Tool

Note: This tool can be used in both Interactive Mode and Batch Mode. For details on scheduling this tool to run in batch mode see Using Batch Mode.

Use the Shutdown Tool utility to stop and restart a remote host after a 60 second grace period.

Note: Because the Dashboard automatically sets the allowable commands for this tool, the Dashboard screen for this utility does not contain a command line input field.

StopShut

Note: This tool can be used in both Interactive Mode and Batch Mode. For details on scheduling this tool to run in batch mode see Using Batch Mode.

Use the Stopshut utility to stop a system from shutting down due to an application or operating system failure.

To Access Stopshut from the Dashboard

To run Stopshut from the Support Tools Dashboard:

Step 1 In the Arguments field, enter desired arguments, as described in the Using section below.

Note: When entering arguments, the stopshut command is already implied. Do not enter it in the Arguments field.

Step 2 Specify the command duration time or accept the default (60 seconds). This is the amount of time the command will attempt to run before terminating.

Step 3 If desired, check Elevate Command Priority. This ensures the command will run regardless of the level of server activity.

Step 4 Click the Run button.

Using Stopshut - Command Line Options

c:\>stopshut

Cisco Support Tools User Guide for Cisco Unified Software Release 2.1(1)

227