Cisco Systems 2.1(1) manual Status Output Controller, With the ICM call router

Chapter 13: - Using Cisco Common Tools

How to Use the RTTest Utility

Status Output: Controller

The second section, labeled Controller in the first column of the status output, shows the status of Cisco ICM peripheral gateway servers.

Controller is the name of the controller (ICM Peripheral Gateway) as defined in Configure initial cell rate (ICR).

Controller:

ATT_NIC_1,128

ATT_NIC_2,129

CA_PG9,9

FL_PG7,7

GA_PG6,6

IA_PG5,5

NY_PG3,3

TX_PG4,4

VA_PG1,1

VB_PG2,2

LastStateChange:	LastHeartBeat:
CFO 03/06 11:10:22 (11.2 day)	03/17 16:00:39 (3 sec)
CFO 03/11 11:07:05 (6.2 day)	03/17 16:00:34 (8 sec)
CFO 03/17 04:42:31 (11.3 hr)	03/17 16:00:31 (11 sec)
CFO 03/11 10:30:16 (6.2 day)	03/17 16:00:32 (10 sec)
CFO 03/12 10:50:43 (5.2 day)	03/17 16:00:29 (13 sec)
CFO 03/11 11:29:27 (6.1 day)	03/17 16:00:32 (10 sec)
CFO 03/11 16:31:36 (5.9 day)	03/17 16:00:38 (4 sec)
CFO 03/11 16:33:37 (5.9 day)	03/17 16:00:38 (4 sec)
CFO 03/13 22:18:32 (3.7 day)	03/17 16:00:33 (9 sec)
CFO 03/16 23:31:31 (16.4 hr)	03/17 16:00:32 (10 sec)

Within the Status Controller output, LastStateChange contains these fields:

C	Signifies that the ICM peripheral gateway server has successfully
	downloaded a configuration from the ICM call router.
F	Signifies that the ICM peripheral gateway is fully configured and the
	configuration is valid.
O	Signifies that the ICM peripheral gateway is online, and is communicating
	with the ICM call router.
Date	Current date.
Time	Current local time.

Cisco Support Tools User Guide for Cisco Unified Software Release 2.1(1)

184