Chapter 13: Using Cisco Common Tools

How to Use the RTTest Utility

dump_indirect_route_meters: Display the routers indirect route meters.

dump_locks: Display the status of locks.

dump_region: Display the contents of a region.

dump_struct: Requests router to dump a structure.

dump_timers: Sends an message telling the router to display its timers.

dump_vars: Dumps info about router variables.

echo: Controls echoing of command lines

enable_config: Makes config commands visible.

error_stop: Controls setting of stop on error flag.

exit: Obsolete. Use exit_router or quit.

exit_dbw: Causes dbworker process to exit.

exit_router: Sends an message telling the router to exit.

expression, expr: Gives the router an expression to evaluate.

get_config: Causes the router to get config from logger.

help, ?: Displays this help.

mem_checkpoint: Controls SmartHeap checkpointing.

mem_meters: Displays router memory meters.

opi_data: Send OPI data message to the router.

quit, q: Ends the program.

read_file, read: Directs command input to another input file

rel_tranroute: Simulate PG releasing a translation route.

route_call: Sends a route call request to the router.

send_alarm: Forces the router to send a message as an alarm.

send_get_config: Sends a GetConfigInd request to the router

send_schedule: Sends a schedule to the router.

set_half_hour: Sends a SetHalfHour request to the router

startrc: Sends a StartRC request to the router

Cisco Support Tools User Guide for Cisco Unified Software Release 2.1(1)

187

Page 201
Image 201
Cisco Systems 2.1(1) manual 187