Cisco Systems 2.1(1) manual Creating a Log Group Examples, Repository Renameloggroup, renlg, 146

	Chapter 12: - Using Cisco Tools from a Command Line
How to Use the Log Groups Utility from a Command Line
Command:	Description:	Example:
display_log_group, dlg	Displays details of a log group from the application server's >dlg <log_group_name>
	Repository.
open_log_group, openlg	Opens a log group for editing from the application server's >openlg <log_group_name>
	Repository.
remove_log_group, rmlg	Deletes a log group from the application server's	>rmlg <log_group_name>
	Repository.
rename_log_group, renlg	Renames a log group in the application server's Repository. >renlg <old_group_name>
		<new_group_name>
		Note: Maximum length for
		name is 32 characters.
xml	Note: This command is not used with the Log Groups
	utility.
read_file, read	Directs command input to another input file.	>read <filename>
	For example, you can direct input to run a batch file that
	contains a series of commands executable by this utility.
silent	Note: This command is not used with the Log Groups
	utility.
quit, q	Ends the program.	>quit

Creating a Log Group - Examples

The following table shows a sample log group creation, with a description of each entry.

Command Option:	Description:
>lgtool	Invokes the Log Group utility.
>clg my_log_group	Initiates a request for a new group and specifies the group name.
>lsys	Displays a list of systems, instances, nodes, and processes whose
	logs can be added to the group.
>al /product ICM /system 192.168.2.199	Adds an ICM log to the group request.
/icm_customer customer_1 /icm_node LoggerA
/icm_process csfs

Cisco Support Tools User Guide for Cisco Unified Software Release 2.1(1)

146