Creating a Trace Group

Note: Not all Cisco Unified components and processes are supported. When a component in a
log group is not supported a specific message noting that the component is not supported
displayed.
To Create a Trace Group in Interactive Mode:
Step 1 From the Create Trace Group screen, click Get Trace Settings.
Trace Groups are based on the products and processes defined in a Log Group. You must first
Create a Log Group (page 107) before you can create a Trace group.
Step 2 A List of configurable trace setting is displayed on the page for each trace tool that is available
to set trace levels for the products and processes defined in the log group. For each section of
trace settings you can choose Low, Medium, High, or Current trace setting for the section, or
optionally select individual settings from within the section. Checking the Low, Medium, High,
or Current will automatically check settings for that section based on predefined values.
Mousing over any of the setting check boxes may display a pop-up help box that describes the
setting.
Note: The "Current" setting does not always display the actual current trace settings on the
server.
Step 3 Click Finish when you have completed making your trace setting selections.
A confirmation page displays notifying you that the trace group has been created.
Step 4 Click OK to return to the Create Trace Group Screen.
How to Use the Trace Groups Screen
The Trace Groups Screen (History - Trace groups) allows you to View a trace group's settings,
Edit the trace group's settings, Rename or delete the trace group, or refresh the list of trace
groups.

Viewing a Trace Group's Settings

To view a Trace Group's Settings:
Step 1 From the History - Trace Group screen, check the Select box next to the Trace Group whose
settings you want to view.
Step 2 Click View Settings
Cisco Support Tools User Guide for Cisco Unified Software Release 2.1(1)
113
Chapter 11: Using Support Tools Utilities from the Dashboard
How to Use the Trace Groups Screen