Note: Because the Dashboard automatically sets the allowable commands for this tool, the
Dashboard screen for this utility does not contain a command line input field.
SysteminfoList
Note: This tool can be used in both Interactive Mode and Batch Mode. For details on scheduling
this tool to run in batch mode see Using Batch Mode.
Displays detailed configuration information about a computer and its operating system, including
operating system configuration, security information, product ID, and hardware properties, such
as RAM, disk space, and network cards.
Note: Because the Dashboard automatically sets the allowable commands for this tool, the
Dashboard screen for this utility does not contain a command line input field.
SysteminfoCSV
Note: This tool can be used in both Interactive Mode and Batch Mode. For details on scheduling
this tool to run in batch mode see Using Batch Mode.
Displays detailed configuration information about a computer and its operating system, including
operating system configuration, security information, product ID, and hardware properties, such
as RAM, disk space, and network cards.
Note: Because the Dashboard automatically sets the allowable commands for this tool, the
Dashboard screen for this utility does not contain a command line input field.
Taskkill
Note: This tool can be used in both Interactive Mode and Batch Mode. For details on scheduling
this tool to run in batch mode see Using Batch Mode.
Ends one or more tasks or processes. Processes can be killed by process ID or image name.
Usage: TASKKILL [/S system [/U username [/P [password]]]] { [/FI filter]
[/PID processid | /IM imagename] } [/T] [/F]
Parameter List:
/S system: Specifies the remote system to connect to.
/U [domain\]user: Specifies the user context under which the command should execute.
/P [password]: Specifies the password for the given user context. Prompts for input if omitted.
/FI filter: Applies a filter to select a set of tasks. Allows "*" to be used. ex. imagename eq acme*
Cisco Support Tools User Guide for Cisco Unified Software Release 2.1(1)
245
Chapter 14: Using 3rd Party Common Tools
SysteminfoList