Note: Because the Dashboard automatically sets the allowable commands for this tool, the
Dashboard screen for this utility does not contain a command line input field.
Net Statistics ServerNote: This tool can be used in both Interactive Mode and Batch Mode. For details on scheduling
this tool to run in batch mode see Using Batch Mode.
Use the Net Statistics Works utility to view statistics for the local Server service.
Note: Because the Dashboard automatically sets the allowable commands for this tool, the
Dashboard screen for this utility does not contain a command line input field.
Net Statistics WorkstationNote: This tool can be used in both Interactive Mode and Batch Mode. For details on scheduling
this tool to run in batch mode see Using Batch Mode.
Use the Net Statistics Workstation utility to view statistics for the local Workstation service.
Note: Because the Dashboard automatically sets the allowable commands for this tool, the
Dashboard screen for this utility does not contain a command line input field.
NetStatNote: This tool can be used in both Interactive Mode and Batch Mode. For details on scheduling
this tool to run in batch mode see Using Batch Mode.
Use the NetStat utility to view network information for the target host, including protocol
statistics and current TCP/IP network connections.
To Access NetStat from the Dashboard
To run NetStat from the Support Tools Dashboard:
Step 1 In the Arguments field, enter desired arguments, as described in the Using section below.
Note: When entering arguments, the NetStat command is already implied. Do not enter it in
the Arguments field.
Step 2 Specify the command duration time or accept the default (60 seconds). This is the amount of
time the command will attempt to run before terminating.
Step 3 If desired, check Elevate Command Priority. This ensures the command will run regardless of
the level of server activity.
Cisco Support Tools User Guide for Cisco Unified Software Release 2.1(1)
221
Chapter 14: Using 3rd Party Common Tools
Net Statistics Server