Cisco Systems 2.1(1) manual Selecting a System to Work With in Interactive Mode

Chapter 10: Using the Support Tools Dashboard

Using the Dashboard for the First Time

–System Interrogate

–Registry

–Registry Compare

–Processes

–Services

–Trace and Log

–Common Tools (Including; Cisco and Third Party tools)

•Batch Mode

–System Interrogate

–Registry

–Processes

–Services

–Trace and Log

–Common Tools (Including; Cisco and Third Party tools)

Note that if you are not a member of the privileged user group, certain utilities will not be available to you and will not appear on the Support Tools menu. See About the Support Tools Utilities for a list of these privileged tools.

Selecting a System to Work With in Interactive Mode

The first action you typically take after logging in to the Dashboard is to select the system that you want to work with. Many Support Tools Interactive Mode utilities cannot be used until you first select a system.

Select the current system using the Select System utility. After you have completed working with that node, you can use the Select System utility to choose a different system to work with.

Adding a System to the System List

In order to select a system to work with, you may first need to add it to the Support Tools system list (if it is not already defined in the list). You can do this using the Select System or System Management screens.

You add multiple systems by clicking Support Tools > System Management.

Cisco Support Tools User Guide for Cisco Unified Software Release 2.1(1)

73