Cisco Systems 2.1(1) manual Example, Debug Information, 176

Chapter 13: - Using Cisco Common Tools

How to Use the OPCTest Utility

trunk_group_trace: Controls TrunkGroup tracing in the OPC.

tuning_param, tune: Controls tuning in the router.

Example

The following example shows detailed output for the status command:

Figure 5: OPC Test Example Output

Debug Information

You can enable specific debugging within OPCTest by issuing the debug command. Turning up specific tracing is much more effective than going into the registry, or turning up the EMSTraceMask for the entire OPC process. Enabling debug control turns up tracing on the part of OPC for that you need additional tracing. The tracing result is displayed in the OPC EMS log files. Use the Trace and Log utility to view the output of the EMS logs.

For example:

opctest: debug /? Usage: debug_control [/realtime] [/agent] [/halfhour] [/rcmeter] [/routing] [/skillgroup] [/closedcalls] [/cstaecr] [/cstacer] [/pimmsg] [/ctimsg] [/rcmsg] [/dmpmsg] [/icmsg] [/opcmsg] [/mdsmsg] [/pdmsg] [/inrcmsg] [/passthru] [/tpmsg] [/physctrlr] [/periph] [/all] [/help] [/?]

If you need to troubleshoot a translation route problem, try the debug /routing command.

Cisco Support Tools User Guide for Cisco Unified Software Release 2.1(1)

176