HP Serviceguard Extension for RAC (SGeRAC) manual Status After Moving the Package to Another Node

PACKAGE	STATUS	STATE
VxVM-CVM-pkg up		running
NODE	STATUS	STATE
ftsys8	down	halted
NODE	STATUS	STATE
ftsys9	up	running

Script_Parameters:
ITEM	STATUS	MAX_RESTARTS	RESTARTS	NAME
Service	up	0	0	VxVM-CVM-pkg.srv

Status After Moving the Package to Another Node

After issuing the following command:

#cmrunpkg -n ftsys9 pkg2

the output of the cmviewcl -vcommand is as follows:

CLUSTER STATUS

example up

NODE	STATUS	STATE
ftsys9	up	running
Network_Parameters:
INTERFACE	STATUS	PATH	NAME
PRIMARY	up	56/36.1	lan0
STANDBY	up	60/6	lan1
PACKAGE	STATUS	STATE	AUTO_RUN	NODE
pkg1	up	running	enabled	ftsys9

Policy_Parameters:

POLICY_NAME CONFIGURED_VALUE

Failover min_package_node

Failback manual

Script_Parameters:
ITEM	STATUS	MAX_RESTARTS	RESTARTS		NAME
Service	up	0	0	service1
Subnet	up	0	0	15.13.168.0
Resource	up			/example/float
Node_Switching_Parameters:
NODE_TYPE	STATUS	SWITCHING	NAME
Primary	up	enabled	ftsys9		(current)
Alternate	up	enabled	ftsys10
PACKAGE	STATUS	STATE	AUTO_RUN		NODE
pkg2	up	running	disabled		ftsys9

Policy_Parameters:

POLICY_NAME CONFIGURED_VALUE

Failover min_package_node

Failback manual

Script_Parameters:
ITEM	STATUS	NAME	MAX_RESTARTS		RESTARTS
Service	up	service2.1	0		0
Subnet	up	15.13.168.0	0		0
Node_Switching_Parameters:
NODE_TYPE	STATUS	SWITCHING		NAME
Primary	up	enabled		ftsys10

120 Maintenance