monitoring CSS-HB subnet (Oracle Cluster Interconnect Subnet Package as shown in the package configuration parameters examples below).

NOTE: Do not configure CLUSTER_INTERCONNECT_SUBNET in the RAC Instance package due to the RAC-IC network being the same as CSS-HB network.

The following is an example of the relevant package configuration parameters:

Oracle Clusterware Package:

 

PACKAGE_NAME

CRS_PACKAGE

PACKAGE_TYPE

MULTI_NODE

LOCAL_LAN_FAILOVER_ALLOWED

YES

NODE_FAIL_FAST_ENABLED

NO

DEPENDENCY_NAME

CI-PACKAGE

DEPENDENCY_CONDITION

CI-PACKAGE=UP

DEPENDENCY_LOCATION

SAME_NODE

Oracle Cluster Interconnect Subnet Package: Package to monitor the CSS-HB subnet

PACKAGE_NAME

CI-PACKAGE

PACKAGE_TYPE

MULTI_NODE

LOCAL_LAN_FAILOVER_ALLOWED

YES

NODE_FAIL_FAST_ENABLED

YES

CLUSTER_INTERCONNECT_SUBNET

192.168.1.0

NOTE: For information on guidelines to change certain Oracle Clusterware and Serviceguard cluster configuration parameters, see “Guidelines for Changing Cluster Parameters” (page 39).

Alternate Configuration—Multiple RAC Databases

When there are multiple independent RAC databases on the same cluster, and if there is insufficient bandwidth over a single network, a separate network can be used for different database interconnect traffic. This will avoid RAC-IC traffic of one database from interfering with that of another.

Figure 9 RAC/RAC-IC Traffic Separation—Multiple Database Configuration

As shown in Figure 9, each primary and standby pair protects against a single failure. If the subnet with SG-HB (lan1/lan2) fails, Serviceguard will resolve the subnet failure with a Serviceguard cluster reconfiguration. If the 192.168.2.0 subnet (lan3 and lan4) fails, Oracle instance membership recovery (IMR) will resolve the interconnect failure subnet, unless Serviceguard subnet monitoring is used. Oracle will wait for IMR time interval prior to resolving the subnet failure. In SGeRAC configurations, default value of IMR time interval may be as high as seventeen minutes.

CLUSTER_INTERCONNECT_SUBNET can be configured for RAC instance MNP to monitor the RAC-IC subnet that is different from CSS-HB subnet. The parameter file (SPFILE or PFILE) for RAC instances must have cluster_interconnects parameter defined, to hold IP address in

38 Serviceguard Configuration for Oracle 10g, 11gR1, or 11gR2 RAC

Page 38
Image 38
HP Serviceguard Extension for RAC (SGeRAC) manual Alternate Configuration-Multiple RAC Databases