HP Serviceguard Extension for RAC (SGeRAC) manual Node 1 Upgraded to SG/SGeRAC

NOTE: If you install Serviceguard and SGeRAC separately, Serviceguard must be installed before installing SGeRAC.

Figure 22 Node 1 Upgraded to SG/SGeRAC 11.16

Step 3.

1.If you prefer, restart the cluster on the upgraded node (node 1). You can do this in Serviceguard Manager, or from the command line issue the following:

# cmrunnode node1

2.At this point, different versions of the Serviceguard daemon (cmcld) are running on the two nodes, as shown in Figure 23.

3.Start Oracle (Clusterware, RAC) software on node 1.

Figure 23 Node 1 Rejoining the Cluster

Rolling Software Upgrades 145