Probe (cont’d)
Fig. 1
Probe error message:
If the error message "Prob ERR" displays (Fig. 1), check to be sure that the probe connector is fully inserted into the receptacle. If the probe is fully inserted in the receptacle and the error message remains displayed, the probe may be defective and need replaced.
When "Prob ERR" displays, the oven control will not permit any oven feature to activate until corrected or the probe is removed. If the error message continues, remove the probe from the receptacle and oven.
"Probe Too Hot" message:
When the message "Prob" ... "Too"... "Hot" ... flashes in the display, the probe sensor temperature has exceeded 250°F (121°C). If the probe is not removed this message may continue until the sensor reaches 300°F (149°C) or higher, at which time the oven will automatically turn OFF and display "Prob ERR" message.
This message may have been generated if the probe sensor is exposed to direct oven heat or the food internal temperature is over 250°F (121°C). Be sure the probe sensor is fully covered by the food or if the food is done, press cancel and remove food and probe from the oven.
handle
probe cable
handle
probe sensor
Fig. 2
SETTING OVEN CONTROLS
NOTES
•During the cooking process the internal food temperature will display by default. To review the
target temperature press the 
keypad once.
After 6 seconds the display will revert back to the internal food temperature.
•To assure temperature accuracy, do not remove the probe from the food or receptacle until the desired internal temperature is met.
•If the probe is active and the probe is removed from the receptacle only, the probe feature will cancel but the oven will continue to cook.
•If the probe is active and the probe is removed from the food only, the probe feature will remain active, but the displayed internal food temperature may no longer be reliable. This may eventually generate a "Probe Too Hot" message.
•The oven will automatically turn OFF if the probe sensor reaches 300°F (149°C) or more.
•The probe feature cannot be set with broil or self- clean.
•To change the target temperature while cooking,
press the | keypad once. Use the numeric |
keypads to change the target temperature. Press the start keypad to accept any change.
23
