Frigidaire FGGF3054MB, FGGF3054MF, FGGF3054MW Convect convert, Probe, Press convect convert

SETTING OVEN CONTROLS

Convect convert

The convect convert feature allows you to convert any baking recipe for the convect feature. The control uses the normal recipe settings and adjusts to a lower temperature for convection baking. The convect convert feature may only be used when convect baking.

To set convect using default oven set temperature of 350°F and adding the convect convert:

	Step	Press
1.	Press convect keypad.
2.	Press convect convert.

To stop convect convert at any time press cancel.

NOTES

•When convect convert is active with a bake time or a delay start setting, the convect convert feature will display the message "CF" for check food when the bake time is 75% complete (See Fig. 1). At this time the oven control will sound 1 long beep at regular intervals until the set bake time has finished.

•When using convect convert, any cook time reductions needed may vary depending on the oven set temperature.

•When baking layer cakes, use the bake feature to obtain the best results.

•The convection fan will not start until 6 minutes after setting the convect convert feature.

•The minimum bake time setting allowed using the convect convert feature is 20 minutes.

Fig. 1

Probe

Be sure to use the probe feature for best results when cooking foods such as roasts, hams or poultry. This

feature also works well with other foods such as meat loaf
and casseroles.	handle
For some food types, especially
poultry and roasts, using a probe
to check the internal temperature
is the safest possible method to	probe
insure properly cooked food.
The probe feature, when set	cable
correctly, will alert when the
internal food temperature
reaches the desired "target"
temperature.	handle
When active, the probe will
display the internal food
temperature, eliminating the	probe
need for any guesswork.	sensor

Fig. 2

CAUTION

To avoid the possibility of burns after cooking with the probe, use care when disconnecting the probe from the receptacle or food. The probe may be hot. Be sure to always use a pot holder to protect hands.

IMPORTANT

•To avoid damaging the probe, do not use kitchen utensils such as tongs to pull on the probe cable or handles. Always insert and remove the probe using the provided handles (See Fig. 2) and always use a pot holder to protect hands from possible burns.

•Do not store the probe inside the oven. Always remove the probe from the oven when finished.

•Use only the original probe provided with this appliance. Connecting any other probe or device into the probe receptacle could result in damage to the oven control, electronics and the receptacle.

•Before starting self-clean, double check that the probe is removed from the oven interior. The high temperatures generated by self-clean may damage or destroy the probe.

•To avoid damaging the probe, defrost frozen foods completely before inserting the probe.

20