Yamaha RX-V4600 owner manual Enjoying 2-channel software in surround

Notes

•Some 6.1-channel compatible discs do not have a signal (flag) which this unit can automatically detect. When playing these kinds of discs with 6.1-channel, select decoders (PLxMovie, PLxMusic, EX/ES or EX) manually.

•6.1/7.1-channel playback is not possible even if EXTD SUR. is pressed in the following cases:

–When Surround or Surround Back is set to “None” (see page 63).

–When the source connected to the MULTI CH INPUT jack is being played.

–When the source being played does not contain surround L/R channel signals.

–When a Dolby Digital KARAOKE source is being played.

–When 2ch Stereo, 7ch Stereo or PURE DIRECT is selected.

•When the power of this unit is turned off, the input mode will be reset to AUTO.

•The Pro Logic x decoder is not available when Surround Back is set to “None” (see page 63).

•“PLxMovie” cannot be selected when Surround Back is set to “Large x1” or “Small x1” (see page 63).

■Enjoying 2-channel software in surround

Signals input from 2-channel sources can also be played back on multiple channels.

Set AMP/SOURCE/TV to AMP, then press STANDARD on the remote control to switch between the SUR. STANDARD and SUR. ENHANCED programs.

STANDARD

6

Or press MOVIE or THX on the remote control to select the MOVIE THEATER or THX programs.

MOVIE		THX
4	or	5

Press SELECT on the remote control to select the decoder.

SELECT

7

You can select from the following modes depending on the type of software you are playing and your personal preference.

PLAYBACK

When you select the SUR. STANDARD program

<PRO LOGIC>

Dolby Pro Logic processing for any sources.

<PLIIx Movie>

Dolby Pro Logic x processing for movie software.

<PLIIx Music>

Dolby Pro Logic x processing for music software.

<PLIIx Game>

Dolby Pro Logic x processing for game software.

<Neo:6 Cinema>

DTS processing for movie software.

<Neo:6 Music>

DTS processing for music software.

<CS II	Cinema>*
SRS Circle Surround		processing for movie software.
<CS II	Music>*
SRS Circle Surround		processing for music software.

* (U.S.A. model only)

When you select the SUR. ENHANCED, MOVIE THEATER or THX programs

<PRO LOGIC>

Dolby Pro Logic processing for any sources.

<PLIIx Movie>

Dolby Pro Logic x processing for movie software.

<Neo:6 Cinema>

DTS processing for movie software.

y

•You can also select a decoder with the Decode Type parameter in the Stereo/Surround menu (see page 99).

•You can also select a decoder by pressing l / h on the remote control when the decoder type is displayed in the short message display.

Note

The Pro Logic x decoder is not available when Surround Back is set to “None” (see page 63).

OPERATION BASIC

37