Select Input select, Input Assign Input assign

■Information (Information)

Use this feature to display the following information: operation status of registered i.LINK components, registered i.LINK components that have been deleted, and i.LINK signals that are currently being received. i.LINK Select > Information >

Choices: Details, Delete, Protect, i.LINK Status

•Select Details to display the following information about the selected i.LINK component.

–Vendor: Displays the name of the manufacturer for your i.LINK component.

–Model: Displays the model name of your i.LINK component.

–Active (connected) or Non Active (not connected): Displays depending on whether your i.LINK component is connected.

–Audio (for audio signals) or Non Audio (for non- audio signals): Displays depending on whether your i.LINK component supports audio signal playback.

–Assign: Displays the name of the input assigned to the selected i.LINK component.

•Select Delete to delete the selected i.LINK component from the registered components list. To delete, press ENTER. You can only delete non-active and unprotected i.LINK components.

•Select Protect to protect the selected i.LINK component from being accidentally deleted.

•Select i.LINK Status to display operation status of i.LINK signals that are currently being received. You can also use this feature to delete all non-active and unprotected i.LINK components together at once.

Note

Information about unregistered i.LINK components is not available in the GUI menu. These i.LINK components cannot be used on this unit although they can be output to other i.LINK components.

■Select (Input select)

Use this feature to select which registered i.LINK component’s audio signal will be selected for playback. i.LINK Select > Select >

Select the name of the desired component and press ENTER to switch the input. When you select the desired component, its manufacturer and model information appear along with its input assignment.

USING i.LINK

■Input Assign (Input assign)

Use this feature if you want to change the input assignment of a registered i.LINK component. You can select to assign the i.LINK component to any of the various inputs (PHONO to V-AUX).

i.LINK Select > Input Assign >

Choices: PHONO, CD, CD-R, MD/TAPE, DVD, DTV,

CBL/SAT, VCR 1, DVR/VCR 2, V-AUX,

No Assignment

1Press k / n repeatedly to select the i.LINK component you want to assign, then press h.

2Press k / n repeatedly to select the input for the i.LINK component, then press ENTER.

This menu item is also available in the front panel display system options menu (see page 90).

■Auto Play (Auto Play)

Use this feature to turn on/off automatic playback when an i.LINK component is selected using the INPUT selector or to select whether you want the input to switch automatically when an input stream from a connected i.LINK component is detected.

i.LINK Select > Auto Play >

Choices: ← – → Player, → → → Player, ← ← ← Player,

–X – Player

•Select ← – → Player if you want both playback to start automatically on the i.LINK component selected using the INPUT selector, and you want this unit to automatically switch its input to the i.LINK component which has started playing back.

•Select → → → Player if you want playback to start automatically on the i.LINK component selected using the INPUT selector.

•Select ← ← ← Player if you want this unit to automatically switch its input to the i.LINK component which has started playing back.

•Select – X – Player to disable automatic playback for the i.LINK components. This setting also prevents this unit from automatically switching its input to the i.LINK component.