Yamaha RX-V4600 Starting the setup, Press k / n repeatedly to select Setup Menu, then press h

AUTO SETUP
Starting the setup
	4 Press k / n repeatedly to select Setup Menu,
For best results, make sure the room is as quiet as possible	then press h.
during the auto setup procedure (YPAO). If there is too
much ambient noise, the results may not be satisfactory.
y	Information

If your subwoofer has adjustable volume and crossover/high cut frequency controls, set the volume between 9 and 11 o’clock (as viewed on a conventional clockface) and set the crossover/high cut frequency to the maximum.

Setup Menu	Wiring
Setup Type	Distance
Start	Size

	CROSSOVER/
VOLUME	HIGH CUT

MIN MAX MIN MAX

Subwoofer

5Press k / n repeatedly to select Wiring,

Distance, Size, Equalizing or Level, then press h.

1Switch on this unit and video monitor.

2Set AMP/SOURCE/TV to AMP, then press TOP on the remote control.

The top display appears.

AMP	TOP
SOURCE	TITLE
TV

	Skip	Wiring	Skip
Wiring	Check	Distance	Check
Distance		Size
Size		Equalizing
Wiring		Distance
Distance	Skip	Size	Skip
Size	Check	Equalizing	Check: Natural
Equalizing		Level	Check: Flat
Level			Check: Front
	Size
	Equalizing	Skip
	Level	Check

Stereo/Surround
Input Select	Sound
Manual Setup	Basic
Auto Setup	Option

y

Equalizing is also available in the front panel display system options menu (see page 87).

6For Wiring, Distance, Size or Level, select:

System Memory	Check	To automatically check and adjust the selected
		item.
	Skip	To skip the selected item and perform no
3 Press k / n repeatedly to select Auto Setup,		adjustments.
then press h.	y

PRESET	PRESET
ENTER	ENTER
A/B/C/D/E	A/B/C/D/E

Input Select
Manual Setup	Information
Auto Setup	Setup Menu
System Memory	Setup Type
Audio Info.	Start

When using THX speakers, select “Skip” for Size and make sure that “Small” or “Small x2” is selected in Speaker Set (page 62) and that “80Hz” is selected in Bass Cross Over

(page 63).

28