Yamaha RX-V4600 For Equalizing, press k / n to select, Press n to select Start, then press Enter

For Equalizing, press k / n to select:

Skip To skip the selected item and perform no adjustments.

Check: Natural To average out the frequency response of all

	speakers with higher frequencies being less
	emphasized. Recommended if the “Flat”
	setting sounds a little harsh.
Check: Flat	To average the frequency response of all
	speakers. Recommended if all of your
	speakers are of similar quality.
Check: Front	To adjust the frequency response of each
	speaker in accordance with the sound of
	your front speakers. Recommended if your
	front speakers are of much higher quality
	than your other speakers.

7Once you have selected the desired setting, press l to move back to Setup Menu.

Information
Setup Menu	Wiring
Setup Type	Distance
Start	Size

AUTO SETUP

9Press n to select Start, then press ENTER.

Loud test tones are output from each speaker and “Measuring” appears during the auto setup procedure.

Setup Menu

Setup Type

Start Start:ENTER

y

•To stop the auto setup procedure, press one of the cursor buttons (k/ n / l / h) or ENTER. In the pause mode, press k to retry the procedure, l to cancel auto setup.

•If an error message appears during testing, refer to “Troubleshooting for the auto setup procedure” on page 31, and after carrying out the remedy, retry the auto setup procedure.

•This menu item is also available in the front panel display system options menu (see page 87).

PREPARATION

8Press n to select Setup Type, then select:

Auto	To automatically perform the entire
	auto setup procedure.
Step	To pause for confirmation between
	each check in the auto setup procedure.
Information
Setup Menu
Setup Type		Auto
Start		Step

y

This menu item is also available in the front panel display system options menu (see page 87).

29