Yamaha RX-V4600 B Macro, C Standby, D System Power, E Audio Select, F Sleep, G Multi Ch In

CONTROLS AND FUNCTIONS

BMACRO

Use to program a series of operations for control by a single button (see page 76).

CSTANDBY

Sets this unit in the standby mode.

DSYSTEM POWER

Turns on the power of this unit.

EAUDIO SELECT

Toggles the priority for the type of audio input jack (AUTO, i.LINK, HDMI, COAX/OPT, ANALOG) when one component is connected to two or more input jacks on this unit (see page 40).

FSLEEP

Sets the sleep timer.

GMULTI CH IN

Selects MULTI CH INPUT when using an external decoder (etc.).

HSELECT k / n

Selects another component that you can control independently of the input component selected with the input selector buttons.

IVOL +/–

Increases or decreases the volume level.

JAMP/SOURCE/TV

Selects the component you want to control with the remote control.

AMP: Set to this position to operate this unit.

SOURCE: Set to this position to operate the component selected with an input selector button.

TV: Set to this position to operate the television. To set the remote control codes for components, see page 71.

KMUTE

Mutes the sound. Press again to restore the audio output to the previous volume level.

LPURE DIRECT

Turns on or off PURE DIRECT mode (see page 38).

MEXIT, PRG SELECT

Use to exit the graphical user interface (GUI) mode when AMP/SOURCE/TV is set to AMP.

(U.S.A. model only)

Selects the HD Radio audio program when AMP/SOURCE/TV is set to SOURCE and the unit is in the tuner mode (see page 46).

NNIGHT

Turns on or off the night listening modes (see page 38).

ODISPLAY

Use to enter into the front panel display menu mode when AMP/SOURCE/TV is set to AMP.

(U.S.A. model only)

Toggles between HD Radio information displays when AMP/SOURCE/TV is set to SOURCE and the unit is in the tuner mode (see page 46).

PSTRAIGHT/EFFECT

Switches the sound fields off or on. When STRAIGHT is selected, input signals (2-channel or multi-channel) are output directly from their respective speakers without effect processing.

QSPEAKERS A/B

Use to turn on or off the set of front speakers connected to the A and/or B terminals on the rear panel when AMP/SOURCE/TV is set to AMP, then the corresponding button is pressed each time.

RRE-NAME

Used to change the input source name in the display window (see page 75).

SCLEAR

Used to clear functions acquired when using the learn, macro and rename features, or setting remote control codes (see page 78).

TLEARN

Used to set up the remote control code or program functions from other remote controls (see page 73).

8