Yamaha RX-V4600 Controlling Zone 2/Zone 3 using the remote control, To control Zone 2/Zone

ZONE 2/ZONE 3

Controlling Zone 2/Zone 3 using the remote control

The supplied remote control can be used to control Zone 2/Zone 3. You can even select the input source and control components located in the main room directly from the second/third room regardless of the listening condition in the main room.

■To enable Zone mode on the remote

control

You will be able to switch the remote control mode from one room to another, and use the input selector, STANDBY, SYSTEM POWER, MUTE and VOLUME +/– to control the selected room.

1Set REC OUT/ZONE 2 on the front panel to

SOURCE/REMOTE.

	SOURCE/
DVD REMOTE MD/TAPE
DTV	CD-R
CBL/SAT	TUNER
VCR 1	CD
DVR/
VCR 2

REC OUT/ZONE 2

2Repeat steps 1 through 3 of the procedure in “Setting remote control codes” on page 71.

3Press l / h to select “L;AMP”.

ENTER

4Press ENTER.

“2000” appears in the display window.

5Enter the code number “2001” or “2003”.

For details, see page 72.

6Press ENTER to set the number.

“OK” appears in the display window if setting was successful.

7Press LEARN to complete the Zone setup.

The remote control will be able to operate this unit from Zone 2 or Zone 3.

LEARN

■To control Zone 2/Zone 3

1Press SELECT k repeatedly to display “ZONE 2” or “ZONE 3” in the display window.

SELECT

or

2Press SYSTEM POWER to turn Zone 2 or Zone 3 power on.

3Press an input selector button to select the input source you want to listen to in the second/third room.

The display window shows “2: name of selected

input” or “3: name of selected input” if the remote control is in the Zone 2/Zone 3 mode.

A	B	AUDIO SELECT	SLEEP
PHONO	TUNER	CD	MULTI CH IN
V-AUX	CBL/SAT	MD/TAPE	CD-R
DTV	VCR 1	DVR/VCR2	DVD

Note

Signals input at V-AUX and PHONO jacks cannot be sent to Zone 2/Zone 3.

4You can control the unit from Zone 2 or Zone 3 by using the input selector, STANDBY, SYSTEM POWER, MUTE and VOLUME +/– buttons.

			SYSTEM
POWER	POWER	STANDBY	POWER
TV	AV						SELECT
A	B	AUDIO SELECT	SLEEP
				+	+	+	AMP
PHONO	TUNER	CD	MULTI CH IN
				TV VOL	CH	VOL	SOURCE
								*
V-AUX	CBL/SAT	MD/TAPE	CD-R	–	–	–	TV
DTV	VCR 1	DVR/VCR2	DVD	TV MUTE	TV INPUT	MUTE
				TOP	PRESET	EXIT	PURE DIRECT
				TITLE		MENU

*VOLUME +/– can be used only when Zone2 Volume or Zone3 Volume is set to “Variable” in the GUI menu (see page 67).

84