Yamaha RX-V4600 Basic HDMI operations, Changing HDMI parameters, A.Selhdmi, Select Select

Basic HDMI operations

■Assigning HDMI components

Assigning an HDMI component to a specific input allows you to select the video input signals from that component together with the audio signals received via the HDMI connection for simultaneous playback.

Note

If you want to change the input assignment of a registered HDMI component, use Input Assign in the GUI menu (see page 98) or INPUT ASSIGN in the front panel display system options menu (see page 90).

■Listening to playback from HDMI

components

Perform the following steps to listen to playback from a registered HDMI component.

If the HDMI component has been assigned to a specific input

1Rotate the INPUT selector to select the input assigned to the HDMI component.

2Press AUDIO SELECT repeatedly to set “AUTO” or “HDMI” as the input mode.

	DVR/VCR2		CBL/SAT			MD/TAPE
V-AUX		VCR 1		DTV	DVD		CD-R	CD	TUNER	PHONO
		SP
		A								dB
		A.SEL:AUTO								VOLUME
										L R
				or
	DVR/VCR2		CBL/SAT			MD/TAPE
V-AUX		VCR 1		DTV	DVD		CD-R	CD	TUNER	PHONO
		SP
		A								dB

VOLUME

A.SEL:HDMI L R

3Start playback on the connected HDMI component.

USING HDMI

Changing HDMI parameters

You can change HDMI parameters in the GUI or the front panel display menu.

Display	Speaker B
HDMI	Select
i.LINK Select	Input Assign
Stereo/Surround	Support Audio

y

Input Assign and Support Audio are also available in the front panel display system options menu (see page 90). However, Select and Information are only available in the GUI menu.

■Select (Select)

Use this feature to select the HDMI component assigned to either the HDMI IN or HDMI IN 2 jack of this unit. HDMI > Select >

Choices: IN 1, IN 2

Select IN 1 or IN 2 to choose the HDMI component assigned to either HDMI input jack.

Display	Speaker B
Select	IN 1
Input Assign	IN 2
Support Audio	Zone 3 Volume

Note

When the HDMI component connected to the selected HDMI IN jack is not transmitting audio signals (e.g. Super Audio CD or DVI) and AUDIO SELECT is set to AUTO, audio signals input at the analog or other digital input jacks will be selected to play back. It may take a few seconds before this unit outputs sound.

OPERATION ADVANCED

97