Yamaha RX-V4600 owner manual Front terminals, Center terminals, Surround terminals, Subwoofer jack

■FRONT terminals

Connect one or two speaker systems to these terminals. If you use only one speaker system, connect it to either of the FRONT A or B terminals.

Note

The Canada model cannot output to two separate speaker systems simultaneously.

Bi-wired connection

The unit also allows you to make bi-wired connections to one speaker system. Use two pairs of speaker cables for each speaker (one pair for the woofer and one pair for the tweeter/mid-range). To use the bi-wired connections, press SPEAKERS A and SPEAKERS B on the front panel so that both SP A and B light up on the front panel display.

Bi-wired connection

R +	–	A	–	+	L
FRONT +	–	B	–	+

This unit

■CENTER terminals

Connect a center speaker to these terminals.

■SURROUND terminals

Connect surround speakers to these terminals.

■SUBWOOFER jack

Connect a subwoofer with a built-in amplifier, such as the YAMAHA Active Servo Processing Subwoofer System, to this jack.

■SURROUND BACK terminals

Connect surround back speakers to these terminals.

If you only connect one surround back speaker, connect it to the left (L) terminals.

■PRESENCE terminals

Connect presence speakers to these terminals.

Note

You can also use these terminals to connect Zone 2 speakers (see page 83).

SPEAKER SETUP

PREPARATION

17