Section 2 - OPERATING INSTRUCTIONS
2.8INSTALLATION, COLLECTOR GRASS BAG (Optional accessory on some models)
STEP 1: Install the grass bag adapter and secure to the side and top of the deck with the two nuts provided on the machine. Slot in front edge of adapter must be under nut located on top of deck. See Figure 2.9.
STEP 2: Install grass catcher by sliding connector over flange of adapter. See Figure 2.11
CONNECTOR
ADAPTER
FLANGE
FIGURE 2.11
STEP 3: Grasp front and rear handles on bag and begin bringing them together. Guide right and left
BRING HANDLES
TOGETHER. GUIDE
FOLDS TOWARDS
CENTER OF BAG
WARNING
DO NOT operate without entire Grass Catcher or guard in place. Grass Catcher components are subject to deterioration during normal use. Inspect frequently and replace worn or damaged components immediately.
CONNECTOR
FIGURE 2.13
FIGURE 2.14
FIGURE 2.12
STEP 4: Guide connector plate on rear handle into slot on front handle. See Figure 2.13.
STEP 5: Attach grass bag hooks over middle handle cross bar. See Figure 2.14.
9
