Yamaha RX-V4600 Opening and closing the front panel door, B Straight/Effect, D Tone Control, Zone

CONTROLS AND FUNCTIONS

BSTRAIGHT/EFFECT

Switches the sound fields off or on. When STRAIGHT is selected, input signals (2-channel or multi-channel) are output directly from their respective speakers without effect processing.

CRemote control sensor

Receives signals from the remote controls.

DTONE CONTROL

Use to adjust the bass/treble balance for the front left/right and center channels (see page 35).

EPURE DIRECT

Turns on or off the PURE DIRECT mode. Lights up when turned on (see page 38).

FREC OUT/ZONE 2

Selects the source you want to direct to the audio/video recorder and ZONE 2 outputs independently of the source you are listening to or watching in the main room. When set to the SOURCE/REMOTE position, the input source is directed to all outputs. The source in Zone 2 and the source you record are always identical.

GOPTIMIZER MIC jack

Use to connect and input audio signals from the supplied microphone for use with the AUTO SETUP function (see page 27).

HSPEAKERS A/B

Turn on or off the set of front speakers connected to the A and/or B terminals on the rear panel each time the corresponding button is pressed.

I PHONES (SILENT CINEMA) jack

Outputs audio signals for private listening with headphones. When you connect headphones, no signals are output at the PRE OUT jacks or to the speakers.

All Dolby Digital and DTS audio signals are mixed down to the front left and right channels.

JVIDEO AUX jacks

Input audio and video signals from an external source such as a game console. To reproduce source signals at these jacks, select V-AUX as the input source.

KZONE ON/OFF

MAIN

Turns on the power of the main unit or sets it to the standby mode (see page 83).

ZONE 2

Turns on the power of Zone 2 or sets it to the standby mode (see page 83).

ZONE 3

Turns on the power of Zone 3 or sets it to the standby mode (see page 83).

LZONE CONTROL

Press to control the input or adjust the volume level for the currently selected zone (the main unit, Zone 2 or Zone 3) (see page 83). After you press ZONE CONTROL, the indicator for the currently selected zone flashes in the front panel display for approximately 5 seconds. While the indicator is flashing, perform the desired operation.

MPROGRAM selector

Use to select sound field programs or adjust bass/treble balance (in conjunction with TONE CONTROL).

NVOLUME

Controls the output level of all audio channels. This does not affect the REC OUT level.

■Opening and closing the front panel

door

When you want to use the controls behind the front panel door, open the door by gently pressing on the lower part of the panel. Keep the door closed when not using these controls.

To open, press gently on the lower part of the panel.

6