Yamaha RX-V4600 Clearing function sets, Press CLEAR by using a ballpoint pen or similar object

REMOTE CONTROL FEATURES

4Press the buttons for the functions you want to include in the macro operation in sequence.

You can set up to 10 steps (10 functions). After you have set 10 steps, “FULL” appears and the remote control automatically exits the macro mode.

SYSTEM

POWER POWER STANDBY POWER

TV	AV		MCR 2: AV POWER
A	B 2 AUDIO SELECT		SLEEP
			MCR 3: AUDIO SELECT
PHONO	TUNER	3	MULTI CH IN
		CD
V-AUX	CBL/SAT	MD/TAPE	CD-R
DTV	VCR 1	DVR/VCR2	DVD

MCR 1: DVD

1

Clearing function sets

You can clear all changes made in each function set, such as learned functions, macros, renamed source names and setup remote control codes.

1Set AMP/SOURCE/TV to AMP or SOURCE.

AMP

SOURCE

TV

2Press CLEAR by using a ballpoint pen or similar object.

“CLEAR” appears in the display window.

CLEAR

Indicates the
number of macro	Note
steps entered

Flashes alternately so you can set the next step

If you do not complete each of the following steps within 30 seconds, the clearing mode will be automatically canceled. In this case, press CLEAR again.

Note

To change the selected source component, press SELECT k / n. Pressing the input selector buttons will program a macro step, whereas SELECT k / n only changes the selected component and corresponding component control area.

5Press MACRO again when the operation sequence you want to program is complete.

Note

“ERROR” appears in the display window if you press a button not indicated in the respective step, or if you press more than one button simultaneously.

Memory back-up

If the remote control is without batteries for more than 2 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. If the memory is cleared, insert new batteries, set up the remote control code(s) and program any acquired functions that may have been cleared.

3Press k / n to select the clear mode.

L;CD	(L: name of a component)
	Clears all learned functions in the respective
	component control area. Press an input selector
	button to select the component.
L;AMP	Clears all learned functions for this unit’s control
	area.
L;ALL	Clears all learned functions.
M;ALL	Clears all programmed macros
RNAME	Clears all renamed source names.
FCTRY	Clears all remote functions and returns the remote
	to the factory settings.

4Press and hold CLEAR again for about 3 seconds.

“WAIT” appears in the display window. If clearing was successful, “C;OK” appears in the display window.

CLEAR

y

Once you have cleared a learned function for a button, the button reverts to the factory setting (or to the manufacturer setting, if you have set remote control codes).

Note

“L;ALL” and “FCTRY” may take about 30 seconds to complete.

78