Yamaha RX-V4600 Input Select, Information Information, Assignment Input/output assignment

Input Select

Use this feature to reassign digital input/outputs, select the input signal, rename the inputs, or adjust the level of the signal input at each jack.

1Set AMP/SOURCE/TV to AMP, then press TOP on the remote control.

AMP	TOP
SOURCE	TITLE
TV

2Select Input Select, then press h.

	CD-R
Stereo/Surround	MD/TAPE
Input Select	DVD
Manual Setup	DTV
Auto Setup	CBL/SAT

3Select the desired input (CD, DVD, etc.), then press h to access and adjust.

■Information (Information)

There are 2 types of GUI displays that show HD Radio information when the unit is in the tuner mode: station and music information.

Input Select > TUNER > Information >

Current
Information	Station
Volume Trim	Music
Rename

Station information

(Band / Frequency / Station name / Program / Program type)

Station information is available when a station name is received as data in 4 alphabetical codes.

	Band	FM
Current	Freq.	87.50MHz
	Name
Station	Program
Music
	Program Type

SYSTEM OPTIONS

Music information

Page 1: the summary of music information (Song title / Artist name / Album name)

Page 2: the details of the song title

Page 3: the details of the artist

Page 4: the details of the album

Page 5: the details of the genre

Press l / h repeatedly to toggle between pages. Press ENTER on the remote control to hold the display temporarily. “Hold:ENTER” changes to “Release:ENTER”. Press ENTER again to release it. Music information is available only when data programs are received.

Hold:ENTER [1]2

Station

Music

y

HD Radio information is also available in the front panel display menu (see page 46).

■I/O Assignment

(Input/output assignment)

You can assign the digital audio input/output and component video jacks to other components if this unit’s initial settings do not correspond to your needs. Change the following parameters to reassign the jacks and effectively connect more components.

Once the jacks are reassigned, you can select the corresponding component using the INPUT selector on the front panel or the input selector buttons on the remote control.

Input Select > input source (DVD, etc.) >

I/O Assignment >

Example 1:

To assign the COAXIAL 7 (CD) jack to the DVD input.

1)Select Input Select, then select DVD.

2)Select I/O Assignment > Coaxial Input, then select 7 CD.

OPERATION ADVANCED

55