FRONT PANEL DISPLAY MENUS

This unit has additional menus that are displayed in the front panel display.

Advanced setup menu

This menu offers additional operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.

1Make sure this unit is in the standby mode.

2On the front panel, while holding down STRAIGHT/EFFECT, press STANDBY/ON.

PRESET (User preset)

Use to reset all of this unit’s parameters to the initial factory settings with the exception of System Memory and Auto Setup settings.

Choices: CANCEL, RESET

Select “CANCEL” if you do not want to reset this unit’s parameters.

Select “RESET” to reset this unit’s parameters.

Note

This setting does not affect advanced setup menu item parameters.

REMOTE AMP (Remote control AMP ID)

Use to set this unit’s ID for remote control recognition

(see page 72).

Choices: ID1, ID2

STRAIGHT

EFFECT

STANDBY

/ON

Select “ID1” when the remote control amplifier library

 

code is set to “2000” or “2001”.

Select “ID2” when the remote control amplifier library

 

code is set to “2002” or “2003”.

3Rotate PROGRAM to select the desired menu item.

The name of the selected item appears in the front

panel display.

PROGRAM

4Press STRAIGHT/EFFECT to change the setting.

5Press STANDBY/ON to save the new setting

This unit enters the standby mode.

y

The new setting is activated next time you turn on the power of this unit.

Note

The remote controls and VOLUME control on the front panel of this unit are ineffective while you are using the advanced setup menu.

SP IMP. (Speaker impedance)

Use to set the impedance of this unit so that it matches that of your speakers.

Choices: 6MIN, 8MIN

Select “6MIN” for speakers 6 ohms or higher.

Select “8MIN” for speakers 8 ohms or higher.

REMOTE TUN (Remote control tuner ID)

Use to set this unit’s tuner ID for remote control

recognition (see page 72).

Choices: ID1, ID2

• Select “ID1” when the remote control tuner library

 

code is set to “2602”.

• Select “ID2” when the remote control tuner library

 

code is set to “2603”.

FAN MODE (Fan operation mode)

Use to set the operation of this unit’s cooling fan. Choices: AUTO, CONT.

Select “AUTO” to set the fan to operate automatically according to the temperature of this unit.

Select “CONT.” to set the fan to operate continuously regardless of the temperature of this unit.

<Asia and General models only >

TU (Tuner frequency step)

Use to set the tuner frequency step according to the frequency spacing in your area.

Choices: AM10/FM100, AM9/FM50

Select “AM10/FM100” for North, Central and South America.

Select “AM9/FM50” for all other areas.

LANG. (GUI language)

Use to set the language that appears in this unit’s GUI (graphical user interface) display.

Choices: ENGLISH, JAPANESE, FRENCH, GERMAN You can select the language of your choice.

86

Page 90
Image 90
Yamaha RX-V4600 owner manual Front Panel Display Menus, Advanced setup menu