Yamaha RX-V4600 Speaker Distance Speaker distance, SWFR Phase Subwoofer Phase, Unit Unit

SYSTEM OPTIONS

SWFR Phase (Subwoofer Phase)

If bass sounds are lacking or unclear, use this feature to adjust the frequency phase characteristics of your subwoofer.

Choices: Normal, Reverse

Bass Out

Bass Cross Over

SWFR Phase Normal

Reverse

•Select “Normal” not to reverse the phase for your subwoofer(s).

•Select “Reverse” to reverse the phase for your subwoofer(s).

y

This menu item is also available in the front panel display system options menu (see page 88).

■Speaker Distance (Speaker distance)

Use this feature to manually input the distance of each speaker and adjust the delay applied to the respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations. Thus, a certain amount of delay must be applied to the sound from each speaker so that all sound will arrive at the listening position at the same time.

Manual Setup > Basic > Speaker Distance >

Test Tone	Subwoofer
Speaker Set	Unit
Speaker Distance	Front L
Speaker Level	Front R
THX Set	Center

Unit (Unit)

Choices: Meter (m), Feet (ft)

Initial setting:U.S.A. and Canada models: Feet (ft) Other models: Meter (m)

•Select “Meter” to input speaker distances in meters.

•Select “Feet” to input speaker distances in feet.

Presence R
Subwoofer
Unit	Meter
Front L	Feet
Front R

Speaker distances

Choices: 0.30 to 24.00 m (1.0 to 80.0 ft)

Initial setting: 3.00 m (10.0 ft)

•Front L adjusts the distance of the front left speaker.

•Front R adjusts the distance of the front right speaker.

•Center adjusts the distance of the center speaker.

•Surround L adjusts the distance of the surround left speaker.

•Surround R adjusts the distance of the surround right speaker.

•Surround Back L adjusts the distance of the surround back left speaker.

•Surround Back R adjusts the distance of the surround back right speaker.

•Presence L adjusts the distance of the presence left speaker.

•Presence R adjusts the distance of the presence right speaker.

•Subwoofer adjusts the distance of the subwoofer.

y

This menu item is also available in the front panel display system options menu (see page 88).

Notes

•You cannot adjust the distance of speakers set to “None” in Speaker Set.

•If you are only using one surround back speaker, connect it to the SURROUND BACK (SINGLE) jack, and adjust the distance in Surround Back L.

64