Yamaha RX-V4600 Selecting audio input modes, Displaying information about the input Source, Auto

PLAYBACK

Selecting audio input modes

This unit comes with a variety of input jacks. You can select the type of input signal you want to use as follows.

Press AUDIO SELECT to select an input mode.

In most cases, use AUTO.

					SYSTEM
		POWER	POWER	STANDBY	POWER
AUDIO		TV	AV
SELECT
	or	A	B	AUDIO SELECT	SLEEP
		PHONO	TUNER	CD	MULTI CH IN
Front panel		Remote control

■Displaying information about the input

source

You can display the type, format and sampling frequency of the current input signal.

1Set AMP/SOURCE/TV to AMP, then press TOP on the remote control.

The top display appears.

AMP	TOP
SOURCE	TITLE
TV

V–AUX	DVR/VCR2 VCR 1 CBL/SAT DTV DVD MD/TAPE CD–R	CD TUNER PHONO
	SP
	A	dB
	A.SEL: AUTO	VOLUME
		L R
	Input mode
AUTO	Automatically selects input signals in
	the following order:

1)i.LINK

2)HDMI

3)Digital signals*

4)Analog signals

i.LINK Selects only i.LINK signals.

If no i.LINK signals are input, no sound is output.

HDMI Selects only HDMI signals.

If no HDMI signals are input, no sound is output.

COAX/OPT Selects digital signals input at the OPTICAL or COAXIAL jacks.

Use if i.LINK or HDMI signals are also being input.

ANALOG Selects only analog signals.

If no analog signals are input, no sound is output.

*If this unit detects a Dolby Digital or DTS signal, the decoder automatically switches to the appropriate sound field program.

y

•You can adjust the default input mode this unit selects when the power is turned on (see page 56).

•DTS mode is recommended for playback of a CD or LD encoded in DTS.

Note

If the digital output data of the player has been processed in any way, you may not be able to perform DTS decoding even if you make a digital connection between this unit and the player.

Stereo/Surround
Input Select	Sound
Manual Setup	Basic
Auto Setup	Option
System Memory

2Press n repeatedly to select Audio Info.

The following information appears in the display.

Auto Setup	Format	Analog
System Memory	Sampling	---
	Channel	2/0/---
Audio Info.	Bitrate	---
	Dialogue	---
	Flag1	---
	Flag2	---

Format	Signal format display. When the unit
	cannot detect a digital signal it
	automatically switches to analog input.
Sampling	Sampling frequency. When the unit is
	unable to detect the sampling
	frequency “?” appears.
Channel	Number of source channels in the input
	signal. For example, a multi-channel
	soundtrack with 3 front channels,
	2 surround channels and LFE, is
	displayed as “3/2/0.1”.
Bitrate	Bit rate. When the unit is unable to
	detect the bit rate “– – –” appears.
Dialogue	Dialogue normalization information
	for Dolby Digital signals.
Flag1/Flag2	Flag data encoded with DTS or Dolby
	Digital signals that cue this unit to
	automatically switch decoders.

3Press EXIT.

40