Magnavox 13MDTD20, 20MC4204 Remote Control Setup, Putting Batteries in the Remote Control

T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 8

8 Remote Control Setup

Putting Batteries in the Remote Control

1 Remove the battery compartment lid on the bottom of the remote control by sliding the lid down and off, following the direction of the arrow on the lid.

2 Place two AA batteries inside the battery compartment with their + and – ends aligned as indicated.

3 Replace the battery compartment lid.

Recycling Guidelines/Battery Safety

●Your new product and its packaging contain materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount that needs to be properly disposed. Your product uses batteries that should not be thrown away when depleted but should be disposed of as small chemical waste. Please find out about the local regulations on disposal of your old product, batteries and packaging whenever you replace existing equipment.

●Battery Usage CAUTION - To prevent battery leakage that may result in bodily injury, property damage or damage to the unit.

•Install ALL batteries correctly, with the + and – markings on the battery aligned as indicated on the unit.

•Do not mix batteries, for example, old with new or carbon with alkaline.

•Remove batteries when the unit will not be used for a long time.

Using the Remote Control

Point the remote control at the remote sensor on the front of the TV/DVD. Details are on page 14.

Do not put objects between the remote and the TV/DVD.

1

2

3